Service hotline:+86-755-27703559

Quality Inspection for Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia

Short Description:

Product Detail

About LYA Silicone

FAQ

Product Tags

, , ,
Quality Inspection for Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia Detail:

Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant

  • Offers a cleaner, easier way to feed baby semi-solid foods using just one hand
  • Gently squeeze the silicone base until desired amount of food collects on the spoon
  • Excellent to use anywhere, portable BPA-free silicone feeding spoon holds 3 ounces of baby food, cap keeps spoon sanitary in your purse or diaper bag
  • Includes protective cover to reduce leaks and spills, making the Squeeze Feeder ideal for travel.
  • 120ml silicone baby bottles with spoon feeder, ergonomic shape is easy to squeeze, down to the last bite, also great for milk and formula

Product detail pictures:

Quality Inspection for
 Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia detail pictures

Quality Inspection for
 Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia detail pictures

Quality Inspection for
 Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia detail pictures


Quality Inspection for Custom Silicone Squeeze Baby Food Dispensing Spoon for Infant Supply to Indonesia, The product will supply to all over the world, such as: , , ,

About Shenzhen LYA Silicone                                           

 

Shenzhen LYA Silicone Rubber Products Co., Ltd. and LYA Industrial(HK) Co., Ltd. incorporated in 1995, located in No. 2 Building, Longhua Town, Baoan  District. Our company covers an area of over 3000 square meters. We are a professional Chinese manufacturer of silicone rubber products, integrating designing, developing, manufacturing, selling & service.

We specialize in making silicone mother and baby care products,silicon household items, silicone industrial parts, medical silicone products, silicone auto industrial parts,silicone electronic parts and other customerized silicone products according to our clients` request.

 With advanced automatic equipment and precise testing instruments, we have been continuously carrying out the management principle of “Sincerity, Innovation, Excellence, and Service” and holding tenet of “to be a first-class manufacturer for silicone rubber field “! We always implement strict quality control in our production according to ISO9001 quality standard.

 LYA products export more than fifty countries, including USA, EUROPE, and FRENCH etc. Especially, we work for buyers to customize with your design and LOGO printed. We warmly welcome friends from all over the world to contact us and we will do our best to meet 100% customer satisfaction with our high quality products and services. Welcome OEM

 

Research and Development Advantages                                        

 

  1. Response customer’s question in one hour and propose solutions in four hours.
  2. Professional Research and development team with rich experienced worker.
  3. Special high-precision research and development equipment.
  4. Scientific, high efficiency and reasonable mold structure.
  5. More than fifteen years experience in silicone products.
  6. Highly efficient production team with a cost advantage.
  7. Solve problems fast with satisfaction for advanced production equipment.
  8. less than 30% for the rate of overall production
  9. 99.8% for the rate of one delivery passed
  10. 100% for feedback information processing,
  11. 5% advantage in price for the same quality.
  12. ISO 9001 Audited Supplier

 

Production Advantages                                                    

 

  1. More than fifteen years experience in silicone products.
  2. Highly efficient production team with a cost advantage.
  3. Solve problems fast with satisfaction for advanced production equipment.

 

Quality advantages                                                                                 

 

  1. less than 30% for the rate of overall production
  2. 99.8% for the rate of one delivery passed
  3. 100% for feedback information processing,
  4. 5% advantage in price for the same quality.
  5. ISO 9001 Audited Supplier

 

Advantages of LYA Silicone

FAQ Content

Q: What is the advantage and characteristics of silicone ?
A: Silicone is an Eco-friendly and transparent new material with no smell. It is non-toxic and harmless to human and feels good. It has many superior characteristics like aging resistance, thermal stability (-40℃~250℃), thermally non-conductive and chemically inert, etc.

Special silicone material can meet UV & Gamma stable, conductivity, translucent, low surface energy and FDA Compliant-food contact.

 

Q: What is the cooperation process?
A: Send sample/ 2D or 3D drawing→ examining by engineers→ quotation→ open sample mold→ confirm mold→ open mass mold→ production→ packaging→ shipping.

 

Q: What is the status of your company?
A: Our company covers an area of over 3000 square meters. We have 100 experienced workers, 10 professional engineers and 11 machine equipment (10 for solid compression molding and 1 for liquid injection molding).

 

Q: How to select a good OEM supplier?
A: A good supplier should have full experience on OEM manufacturing and good ability of molding and sampling. It is also important that raw material is 100% natural and product is with strict quality control. Reasonable price and believable productivity should be taken into consideration as well.

We can meet all above.




  • How to Make a Concrete Stamp Using PMC-780

    Contents:
    0:41 – Stone Paver Model Preparation
    1:33 – Stone Paver Layout
    3:32 – Making the Mold Box
    4:46 – Creating Artificial Grout Line
    6:12 – Making Handling Straps
    7:15 – Mixing and Pouring PMC-780 Mold Rubber
    9:06 – Demold

    PMC-780 is a high performance urethane rubber that offers exceptional strength, durability and abrasion resistance.

    Advantages of Stamping Concrete:
    * Limitless design options
    * Can be made to look like brick, stone, wood and more
    * Stamp concrete indoors or out
    * Lower labor and material cost
    * Complete any project in a fraction of the time
    * Lasting Durability: Concrete lasts for years and requires low mainenence

    Stone Paver Model Preparation (0:41)
    Melamine board will be used as the base. Our model is a concrete stone paver. Stone paver dimensions: 12″x12″x1″ (30.5cm x 30.5cm x 2.5cm). Four pavers will be used to create the model. Sonite Wax will be used to seal the stone paver. Sonite Wax is applied over entire face surface of the paver with a brush. Sealing is required to prevent adhesion during the mold making process. The process is repeated for the other pavers.

    Stone Paver Layout (1:33)
    Place the first paver a few inches from the edge of the baseboard. A second paver is placed with a 1/4″ (0.6cm) gap in between to represent the grout line. The last two pavers are offset from the first row. A 1/4″ grout line is maintained throughout the pattern. Paint sticks are used as spacers for creating the artificial grout lines. A steel square (right angle) is used to square the pavers. A pencil is used to create an outline of the pavers. The pencil outline will be used as a guideline when gluing the pavers to the baseboard. Hot-melt glue is applied to the inside perimeter of the outline. The glue holds the pavers in place to ensure proper placement when molding. Process is repeated for the other three pavers. Paint sticks are placed around the paver perimeter to represent outside grout line. Glue is used to adhere paint sticks together.

    Making the Mold Box (3:32)
    To construct the mold walls, measurements are taken from the outside edges. Melamine board is cut to size and will be used to construct the mold box walls. Remove all paint sticks. Place mold box walls into position. A 1/4″ grout line is maintained between pavers and around the perimeter. Walls are secured with drywall screws. Paint sticks are placed around the mold box perimeter to ensure proper grout spacing.

    Creating Artificial Grout Line (4:46)
    Sculptex non-sulfur based clay will be used to fill in the grout cavity. Sculptex is easily cut into 1/4″ sefments with a knife. The clay is used to fill in the caity to create an artificial grout line. Remove spacers as needed. Clay is also placed along mold box walls. A chisel is used to create a “pointed grout” line in the clay. A chip brush is trimmed to stiffen the bristles. The brush is used to create a sanded grout texture. Hot-melt glue is applied to all seams of the mold box, preventing any leaks of mold rubber. Universal Mold Release is applied to all surfaces to prevent adhesion of the mold rubber.

    Making Handling Straps (6:12)
    Nylon webbing will be used to form straps that will be incorporated into the stamp. Two sections of nylon webbing are cut to approximately 14″ (35.6 cm) in length. Webbing is looped to form a handle. The loop is held in place with a staple. Gallon containers will support the bridge in which the handles are suspended. Two paint sticks are glued together and will act as a bridge to support the webbing. The wood bridge is placed in the center of the mold box. Webbing is suspended 1/2″ (1.3cm) above the model.

    Mixing and Pouring PMC-780 Mold Rubber (7:15)
    PMC-780 Urethane Rubber Compound, mix ratio 2A:1B by volume. Part B is pre-mixed before using. SO-Strong pigments were used to transform the PMC-780 (amber in color) into an opaque orange. SO-Strong White is added to Part B, this will make the translucent rubber opaque. Color tint is blended into Part B. SO-Strong Orange is added to Part B and mixed. Part A is dispensed into a large mixing bucket. Dispense the pigmented Part B into Part A. Mix thoroughly for three minutes. Scrape sides and bottom of mixing container to ensure a proper mix of materials. Slowly pour the rubber into the mold box. Rubber should level off at least 1/2″ over the highest point of the model’s surface. Adjustments are made to ensure the web handles are encapsulated in the rubber and not touching the face of the model. Let the rubber cure for 48 hours at room temperature (73°F/23°C) before demolding.

    Demold (9:06)
    A scraper is used to loosen the rubber from the mold box walls. Fully cured rubber is ready to demold. PMC-780 picks up all the detail from the original stone paver. PMC-780 rubber is durable yet flexible.

    Make It Now! with Smooth-On

    http://www.smooth-on.com/

    http://www.facebook.com/SmoothOn

    http://twitter.com/SmoothOn

    http://www.google.com/+smoothon

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Latest News

    Services

    Contact Us

    • New Building 2,Baohua Industrial Zone,Longhua District,Shenzhen City,Guangdong Province,China 518109
    • +86-755-27703559
    • sale7@lyasilicone.com
    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !